Where to Buy Industrial NaOCl Javen? Price Quote for 10% and 12% Javen
Table of contents
Summary:
- Javen quotes must specify NaOCl concentration (10% or 12%) with batch COA — compare prices per kg of active chlorine, not just per kg of solution.
- Pricing depends on concentration, order volume, delivery distance, and market timing.
- Choose suppliers with warehouses near your industrial zone to reduce costs and shorten delivery time.
- Request complete COA + MSDS for quality control and plant safety records.
- Loc Thien delivers bulk Javen tailored to customer needs — call 0979 891 929 for specific pricing.
Where to Buy Industrial NaOCl Javen?
Industrial Javen (Sodium hypochlorite NaOCl, CAS 7681-52-9) is supplied by industrial chemical manufacturers and suppliers nationwide. For factories and enterprises, choosing the right supplier directly impacts water treatment quality and operational safety. Three key selection criteria:
- Batch-specific COA/MSDS — confirms actual concentration and complete chemical safety documentation.
- Warehouse proximity to your plant — Javen decomposes over time; fast delivery preserves active chlorine and reduces transport costs.
- Approved transport vehicles — specialized tankers for corrosive chemicals; avoid unsuitable vehicles causing leaks.
Loc Thien Chemicals (Tax Code 0313650856) is an industrial chemical supplier in Binh Duong, supplying NaOCl Javen to water treatment plants, wastewater facilities, textile dyeing, and processing plants nationwide.
Javen 10% and 12% Quotes by Packaging
Loc Thien does not publish a fixed Javen price, because B2B unit prices depend on volume, delivery region and packaging. The table below is transparent about the price structure — the factors that drive the unit price of each packaging format:
| Packaging | Best For | Price Drivers |
|---|---|---|
| 30L Plastic Can — Javen 10% | Small needs, trial orders | Can cost + filling labor carry the highest share per liter |
| 200L HDPE Drum — Javen 10-12% | Small to medium plants | Drum cost, drums per trip, delivery distance |
| 1000L IBC Tank — Javen 12% | Medium-sized plants | IBC deposit or purchase, regular delivery frequency |
| 5–30 Ton Tanker — Industrial Order | Water plants, industrial zones, large WWTPs | No packaging — lowest unit cost per kg; depends on monthly volume and delivery point |
Every format is quoted on your actual volume and delivery point — call 0979 891 929 for an exact quote within 15 minutes.
How to compare quotes correctly: calculate price per kg of active chlorine. 10% Javen contains ~9.5% active chlorine; 12% has ~11.4%. Formula: cost per kg active chlorine = price per kg solution ÷ active chlorine content (e.g. P₁₀ ÷ 0.095 vs. P₁₂ ÷ 0.114). A “higher” 12% Javen price per kg may actually be cheaper per kg of active chlorine — the true disinfection cost metric. For current pricing, call 0979 891 929 for an official quote within 15 minutes, including reference COA.
Figure: On-site chemical dosing, storage tank operation, and batch COA inspection — Source: Loc Thien Chemical.
Criteria for Choosing a Reliable Javen Supplier
Certifications and quality records. Suppliers must provide COA (Certificate of Analysis) per batch, specifying NaOCl and active chlorine concentrations, plus MSDS (Material Safety Data Sheet). These documents support quality management, shipment verification, and compliance.
Warehouse network and delivery capacity. Warehouses near industrial zones shorten delivery time and reduce active chlorine loss during transit. Loc Thien operates 6 nationwide warehouses and a fleet of specialized tankers, ensuring fast delivery to industrial zones in Ho Chi Minh City, Binh Duong, Dong Nai, and neighboring provinces per our shipping policy.
Technical support. Good suppliers offer dosing, dilution, and residual chlorine control advice — crucial when switching from chlorine gas to Javen or scaling treatment capacity.
Javen Packaging and Transport Options
| Format | Specifications | Ideal For |
|---|---|---|
| Tanker Trucks | 5–30 tons/trip | Large-scale water plants, industrial zones, wastewater treatment facilities |
| IBC Tanks | 1000 L | Medium-sized plants |
| HDPE Drums | 200 L | Small needs, trial orders, or top-ups |
| Plastic Cans | 25–30 L | Convenient for internal supply |
Javen is a corrosive chemical (UN 1791 transport class), requiring chemical-resistant HDPE, PVC, or FRP tanks/containers. Loc Thien delivers in volumes matching customer needs — from drums to tankers — ensuring correct concentration and quantity per order.
Javen Inspection and Acceptance Protocol
When receiving Javen, conduct these basic checks to safeguard input quality:
- Document verification: match COA-specified NaOCl/active chlorine concentrations and batch numbers on packaging/delivery notes.
- Packaging inspection: confirm correct volume/weight and container type (HDPE drums, IBCs, tankers) with no leaks.
- Visual check: solution should be pale greenish-yellow, clear, with characteristic chlorine odor. Abnormal color or sediment requires immediate supplier consultation.
- Retain samples: keep batch samples for quality dispute resolution.
- Active chlorine test: if possible, use iodometric titration or chlorine test kits to verify concentration before storage.
Strict acceptance prevents receiving degraded Javen due to prolonged storage or poor handling, which directly impacts disinfection efficiency and operating costs.
Technical Support & B2B Procurement Hotline
Loc Thien Chemical specializes in direct manufacturing of FeCl₂ / FeCl₃ and direct industrial supply of basic chemicals (NaOH, HCl, H₂SO₄, PAC, NaOCl, H₂O₂, FeSO₄) with direct B2B pricing and dedicated 5–30-ton tanker delivery across Vietnam.
- Hotline / Zalo: +84 979 891 929
- Official Email: [email protected]
- Direct Manufacturer: Ferrous Chloride (FeCl₂ 30%) & Ferric Chloride (FeCl₃ 38–40%)
- Primary Supplier: NaOH 32%/45%/50%/99%, HCl 32%, H₂SO₄ 98%, PAC 30–31%, NaOCl 10–12%, H₂O₂ 35%/50%
- Compliance & Quality: FeCl₂ ZDHC MRSL v3.1 test report (Smart testing, 5 substance groups, TUV Rheinland Vietnam), ISO 9001:2015, Quatest 3, Full COA & GHS SDS
Frequently Asked Questions
What are current prices for 10% and 12% Javen?
Prices vary by market and order volume, with no fixed rates. Call 0979 891 929 for an official quote within 15 minutes, including reference COA for your required concentration.
Does Loc Thien deliver Javen to my plant?
Yes. Loc Thien delivers from 6 nationwide warehouses via a fleet of specialized tankers, serving plants in Ho Chi Minh City, Binh Duong, Dong Nai, and nearby provinces. Delivery time depends on distance and order volume.
Should I choose 10% or 12% Javen?
Base your choice on plant scale and location. 12% Javen offers better logistics efficiency for distant plants (more active chlorine per trip), while 10% allows easier dosing control. Compare prices per kg of active chlorine.
Are COA and MSDS provided?
Yes. Every Loc Thien Javen batch includes COA (with concentration details) and MSDS, fulfilling plant quality and safety documentation requirements.
Can I order small quantities?
Loc Thien supplies Javen flexibly — from 200L drums to tankers. Call 0979 891 929 for packaging recommendations matching your needs.
Get a Javen NaOCl Quote Now
Call 0979 891 929 — Loc Thien’s team provides 10%/12% Javen quotes within 15 minutes, including batch-specific COA/MSDS and delivery options from 6 nationwide warehouses.
See also: What is Javen? NaOCl — properties, concentrations & disinfection applications · Javen NaOCl applications — disinfection, wastewater treatment, bleaching
LOC THIEN INVESTMENT DEVELOPMENT CO., LTD Tax Code 0313650856 — Manufacturer of FeCl₂ & FeCl₃ and supplier of industrial chemicals in Binh Duong. Hotline: 0979 891 929 · Website: hoachatlocthien.com
Industrial Field Operation & Batch Quality Verification
1. Incoming Batch COA Verification & Regulatory Compliance (Law on Chemicals 69/2025/QH15)
When operating industrial water treatment, surface finishing, or textile dyeing lines in Vietnam, engineering teams must verify every chemical delivery against its batch-specific Certificate of Analysis (COA) and 16-section GHS Safety Data Sheet (SDS). Under the Vietnam Law on Chemicals No. 69/2025/QH15, Decrees 24/2026/ND-CP, 25/2026/ND-CP, and 26/2026/ND-CP, and QCVN 40:2025/BTNMT on industrial wastewater discharge:
- Specific Gravity & Assay Verification: Upon arrival of a 5–30-ton tanker or IBC tote shipment, plant QA technicians measure specific gravity at 20 °C using a calibrated hydrometer and cross-check active concentration against the batch COA issued by Loc Thien Chemical and verified via Quatest 3 (ISO/IEC 17025).
- Impurity & Heavy Metal Control: Trace heavy metals (Fe, Pb, As, Hg, Cd, Cr⁶⁺) and insoluble matter are strictly controlled to prevent catalyst poisoning in Fenton reactors, membrane fouling in RO/UF systems, or shade deviations in reactive textile dyeing.
- ZDHC MRSL v3.1 Level 1 Portfolio Boundary: For export-oriented textile and footwear FDI factories, Loc Thien Chemical maintains official ZDHC MRSL v3.1 Conformance Level 1 documentation for exactly 9 core products: four products certified by TUV SUD Product Service GmbH (
NaOH,H2O2,Na2SO4,Na2CO3) and five products verified via Conformance Summary Report (CSR) and Analytical Test Report by TUV Rheinland Vietnam (H2SO4,FeCl2,HCl,Javel/NaOCl,PAC 31%).
| Control Stage | Inspection Parameter | Test Method / Standard | Operational Target |
|---|---|---|---|
| Pre-Unloading Check | Seal integrity, UN/GHS hazard placards, batch COA & SDS | Visual & Document Audit | 100% match with delivery manifest |
| On-Site Sampling | Specific gravity (20 °C), visual clarity, pH / assay | ASTM / TCVN / Hydrometer | Within ±0.5% of COA specification |
| Dosing Skid Calibration | Metering pump stroke & frequency, back-pressure valve, ORP/pH probe | 2-Point Buffer Calibration | Dosing accuracy ±1.5%, stable effluent |
| Storage Safety Audit | HDPE/FRP tank vents, secondary containment dike (110% volume), eyewash | OSHA / Vietnam EHS | Zero vapor leak, immediate emergency readiness |
2. Dosing Optimization, Storage Materials & Preventive Maintenance
- Compatible Wetted Materials: Use cross-linked high-density polyethylene (XLPE / HDPE), polypropylene (PP-H), fiberglass-reinforced plastic (FRP with vinyl ester resin), or PTFE/PVDF-lined piping depending on corrosive and thermal conditions. Avoid unlined carbon steel or incompatible elastomers.
- Automated Dosing Control: Integrate diaphragm metering pumps with real-time pH, ORP (mV), turbidity, or conductivity sensors. Always perform a 5-beaker Jar Test whenever raw water COD, TSS, or alkalinity shifts by more than 15%.
- Secondary Containment & PPE: Storage tanks must sit inside an acid/alkali-resistant bund wall holding at least 110% of the largest tank volume. Operators handling unloading hoses must wear splash-proof chemical goggles, acid/alkali-resistant nitrile or neoprene gloves, face shields, and emergency respirators.
3. Multi-Role B2B Value Matrix (Procurement · QA/EHS Engineer · Plant Director)
- For Procurement Managers: Loc Thien Chemical is the direct manufacturer of FeCl2 30% solution and FeCl3 38–40% wastewater grade (3,000+ tons/month capacity), and a Tier-1 bulk commercial supplier of NaOH, HCl, H2SO4, PAC, NaOCl, H2O2, FeSO4, and Na2SiO3. Pricing is transparently structured around 5 technical cost drivers (active assay, packaging format, delivery distance from our 6 warehouses, order volume, and scheduled contract cadence) with a 15-minute technical quotation SLA.
- For Environmental & Process Engineers: Full technical support for Jar Test optimization, stoichiometry calculation, sludge minimization, and QCVN 40:2025/BTNMT compliance auditing.
- For FDI Plant Directors: Guaranteed supply continuity via 6 regional warehouses (Ba Ria - Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho, Bac Ninh) and a dedicated 5–30-ton tanker fleet (4 hours in inner HCMC, 24–48 hours across Southern & Mekong Industrial Parks, 2–3 days in Northern & Central Vietnam).
4. Related Technical Resources & 15-Minute Quotation Gateway
- Explore our full industrial catalog: Industrial Chemical Catalog | Technical Knowledge Hub | Request a 15-Minute Technical Quote
- Legal Head Office: 452/6B Tinh Lo 10, Binh Tri Dong Ward, Binh Tan District, Ho Chi Minh City, Vietnam (Head Office only — all physical stock is dispatched from our 6 regional industrial park warehouses).
- 24/7 Technical Hotline: 0979 891 929 (Please contact hotline 0979 891 929 for detailed delivery procedures) | Official Email: [email protected]
Extended Engineering Calculation Example & Jar Test Protocol for Where to Buy Industrial NaOCl Javen? Price Quote for 10% and 12% Javen
In a representative industrial wastewater treatment or surface treatment facility operating at a design flow of 1,200 m³/day (Technical Illustrative Example), process engineers evaluate dosing stoichiometry across three operating scenarios: baseline load, peak shift load (+25% COD/TSS), and seasonal rain dilution. Using calibrated 1,000 mL Jar Test beakers (rapid flash mixing at 180 rpm for 90 seconds, slow flocculation at 35 rpm for 15 minutes, and quiescent settling for 30 minutes), the plant establishes an optimal dosing curve that reduces chemical consumption by 12–18% while maintaining settled water turbidity below 3 NTU and effluent parameters well within QCVN 40:2025/BTNMT Column A. Every bulk shipment from Loc Thien Chemical includes batch-traceable COA analysis, GHS/SDS sheets, and on-site technical support across all 6 regional warehouses in Vietnam.
Transparent 5-Factor B2B Cost Structure & Supply Chain Optimization in Vietnam
Under Loc Thien Chemical’s transparent B2B commercial policy, unit chemical pricing is never published as a static retail figure online; instead, every formal quotation is engineered within 15 minutes around five verifiable cost drivers:
- Active Assay & Grade Specification: Concentration levels (such as 32% / 45% / 50% liquid NaOH vs. 99% pearls, or industrial vs. ZDHC-compliant grades) directly determine the active molar equivalent delivered per metric ton.
- Packaging & Bulk Delivery Mode: Bulk delivery via dedicated 5–30-ton corrosion-resistant tankers eliminates drum handling and minimizes per-ton logistics cost; 1,000 L IBC totes, 200 L drums, and 25 kg woven bags are also stocked.
- Dispatch Distance from Our 6 Regional Warehouses: Orders are routed from the nearest hub (Ba Ria - Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho, or Bac Ninh) to cut freight lead time and carbon footprint.
- Order Volume & Annual Blanket Contracts: Scheduled monthly call-off contracts lock in priority safety stock and volume-tiered commercial terms, insulating factories from raw material spot volatility.
- Batch Documentation & FDI Compliance Package: Every delivery includes a batch-specific COA, 16-section GHS SDS, and—for our 9 certified core textile/footwear chemicals—official ZDHC MRSL v3.1 Conformance Level 1 documentation.
