PAC — Poly Aluminium Chloride for Water Treatment

PAC Al₂O₃ Powder 30%–31% — Textile Dyeing Coagulation,...Liquid PAC (Polyaluminium Chloride) — Al₂O₃ Coagulation...

PAC — Poly Aluminium Chloride for Water Treatment: PAC poly aluminium chloride (CAS 1327-41-9) in liquid and powder grades, including 31% PAC, for water coagulation. MSDS/COA on request. Hotline 0979 891 929 Supplied in bulk from 6 industrial park warehouses across Vietnam (Ba Ria - Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho, Bac Ninh) via licensed 5–30-ton hazmat tankers and 1,000L IBC totes (3,000+ MT/month capacity), complete with batch COA, 16-section GHS SDS, and EPE customs support. Contact hotline 0979 891 929 for detailed delivery procedures and a technical quotation within 15 minutes.

PAC — Poly Aluminium Chloride for Water Treatment

Poly Aluminium Chloride has CAS number 1327-41-9. It is an inorganic coagulant for wastewater and process water. The abbreviation always stays PAC.
Loc Thien supplies PAC grades, including PAC Tenor 31%, with MSDS/COA on request. Hotline 0979 891 929.

CAS 1327-41-9
Coagulation and settling — jar-test before scaling dose
quotation on request

When to use PAC

Coagulation and settling per plant design
Helps reduce turbidity when water parameters fit
Jar testing is required before full-scale operation

FAQ — PAC
What is PAC?
PAC is poly aluminium chloride, a water-treatment coagulant. The abbreviation always stays PAC.
What is the CAS number of PAC?
CAS 1327-41-9.
How does PAC Tenor 31% differ from other grades?
They differ by source, Al2O3% on COA and treatment goals. Select by jar-test and effluent targets.
Can I get SDS and COA?
Yes, for order requirements.
How do I buy PAC bulk?
Send grade, quantity and delivery point. Hotline 0979 891 929.
Select PAC grade by water source — contact Loc Thien for basic guidance and bulk quotation.

Technical Comparison Matrix of PAC Powder (28.5%–31% Al2O3) & Liquid PAC (10%–17%)

Loc Thien supplies a complete range of Poly Aluminium Chloride (PAC, CAS 1327-41-9) primary coagulants, led by our flagship PAC 31% verified under ZDHC MRSL Version 3.1 Conformance Level 1 by TÜV Rheinland Vietnam (CSR & Analytical Report No. 248162921-05):

Product Grade Al2O3 Content & Basicity Origin & Packaging ZDHC MRSL v3.1 Status Recommended Wastewater & Water Treatment Scope
PAC 31% Powder (Viet Tri Vietnam) Al2O3 ≥ 30%–31% · Basicity 40%–85% · Water-insoluble ≤ 0.3% Vietnam · 25kg PE-lined woven bags Level 1 (TÜV Rheinland CSR 248162921-05) Municipal raw water purification, FDI textile & dyeing effluent, pulp & paper, and seafood processing
PAC 30%–31% Powder (India Grasim) Al2O3 ≥ 30% · High polymeric aluminum species (Al13) India · 25kg bags Level 1 (TÜV Rheinland CSR 248162921-05) Centralized industrial park CETPs, high-turbidity surface water, and rapid-settling clarifiers
PAC 31% Powder (Spray-Dried China) Al2O3 ≥ 30%–31% · Fine lemon-yellow powder, fast dissolution China · 25kg bags Level 1 (TÜV Rheinland CSR 248162921-05) Dissolved Air Flotation (DAF) systems, ceramic, livestock, and general industrial effluent
Liquid PAC 17% & Liquid PAC 10% Al2O3 10.0%–17.0% · SG 1.18–1.38 g/cm³ · pH 3.5–5.0 Vietnam · 5–30-ton tankers, 1,000L IBC totes Batch COA & 16-section GHS SDS Dust-free direct PLC metering for automated FDI treatment plants without powder dissolving tanks

Engineering Advantages of PAC Over Conventional Alum Al2(SO4)3

  • Minimal pH Depression & Alkali Savings: Because PAC is pre-hydrolyzed with 40%–85% basicity, it consumes 50%–70% less alkalinity than aluminum sulfate, drastically cutting NaOH or Ca(OH)₂ neutralization costs.
  • 30%–50% Lower Chemical Sludge Volume: Higher polynuclear aluminum charge density forms dense flocs at lower dosage (typically 30–150 mg/L), reducing hazardous sludge disposal expenses while meeting QCVN 40:2025/BTNMT TSS and COD limits.

How should PAC 31% powder be dissolved and dosed in an industrial wastewater plant?

Dissolve PAC 31% powder in clean water to prepare a 5%–10% w/w stock solution using a non-metallic agitator (PP/FRP/SS316), then meter into the rapid-mix tank (150–250 rpm for 1–2 minutes) at pH 6.0–8.5 before adding anionic or cationic polymer.

Can Loc Thien supply both 25kg bagged PAC 31% and bulk 5–30-ton liquid PAC tankers?

Yes. All 6 regional warehouses stock 25kg bagged PAC 31% alongside 1,000L IBC totes and 5–30-ton liquid PAC tankers. Contact hotline 0979 891 929 for a 15-minute technical quotation.

Technical Engineering Guides, Specific Gravity Tables & Core Flagship Products

Core Flagship Products in Stock Across 6 Vietnam IP Warehouses (5–30-Ton Tankers & IBC/Bags): Poly Aluminium Chloride Powder 30%–31% (PAC Powder) · PAC India 25kg · China PAC Tenor 31% · PAC 17% Liquid Polyaluminium Chloride.

In-Depth Engineering Guides, Specific Gravity Tables & ETP Dosing Protocols:

2026 Vietnam Chemical Law Compliance (Law No. 69/2025/QH15 & Decrees 24–26/2026/NĐ-CP) & EPE Customs Support

Under Vietnam's regulatory framework effective in 2026—including the Law on Chemicals No. 69/2025/QH15, Decree 24/2026/NĐ-CP (Industrial Precursor Management), Decree 25/2026/NĐ-CP, Decree 26/2026/NĐ-CP, and Circular 01/2026/TT-BCT—FDI enterprises and Export Processing Enterprises (EPEs) require strict legal traceability across their chemical supply chain. Loc Thien guarantees full compliance on every delivery:

2026 Regulatory & B2B Scope Governing Standard Loc Thien Chemical Execution Commitment
Group 2 Industrial Precursor Control Law 69/2025/QH15 & Decree 24/2026/NĐ-CP Fully licensed to trade Group 2 precursors (H2SO4, HCl, HNO3, H2O2, Toluene) with compliant purchase-sale control slips and electronic lot traceability.
16-Section GHS SDS & Batch COA Decree 26/2026/NĐ-CP & Circular 01/2026/TT-BCT Every shipment includes a batch-matched Certificate of Analysis (COA) and bilingual 16-section GHS Safety Data Sheet (SDS) for EHS audits.
Licensed 5–30-Ton Hazmat Tanker Fleet Decree 25/2026/NĐ-CP & Dangerous Goods Transport Rules Dedicated 5–30-ton tankers (3,000+ MT/month capacity) with valid hazmat transport permits, FRP/PE/SS linings, certified drivers, and onboard spill kits.
EPE On-Spot Customs & 15-Minute Quote SLA Vietnam EPE Customs Rules & Loc Thien SLA Full support for on-spot import/export customs declarations (0% VAT) for EPE factories. Technical quotation within 15 minutes; delivery within 4 hours in inner HCMC, 24–48 hours across Southern & Mekong Delta IPs, and 2–3 days in Northern & Central Vietnam.

Contact hotline 0979 891 929 or email [email protected] for detailed delivery procedures, sample COA/SDS documentation, and a technical quotation within 15 minutes.

📦 Need a Multi-Chemical BOM Package Quote for PAC?

Consolidated supply via 5–30T dedicated tankers, 1000L IBCs & drums from 6 regional warehouses · EPE 0% VAT customs & Vietnam e-VAT (Decree 70/2025/NĐ-CP) · On-site weighbridge check (tanker/full-load) · Official quote within 15 minutes.

WeChat B2B

Connect via WeChat B2B

Loc Thien Chemical — Direct Manufacturer & Industrial Chemical Supplier

Loc Thien Chemical Official WeChat B2B QR Code 0979891929

Scan QR code with WeChat on your phone

WeChat ID 0979891929

Tap the copy button above, then open WeChat and paste ID into Search to connect.

Direct Technical & Bulk Quotation Hotline: 📞 0979 891 929