Where to Buy Industrial PAC? Price Quotes for PAC 31%, PAC 10%, PAC 17%
Table of contents
Summary:
- PAC price depends on Al₂O₃ concentration, form (liquid/powder), order volume, and shipping distance
- PAC 31% is most cost-effective for large-capacity plants (>5,000 m³/day) — lowest transport cost per m³ of water
- PAC 10% suits small plants and swimming pools — easy dosing, no need for large storage tanks
- PAC powder 28–30% optimizes long-distance transport (Central Highlands, Central Vietnam, export)
- Loc Thien delivers directly to tanks — no intermediaries, transparent COA/MSDS per batch
1. Factors affecting PAC pricing
PAC price isn’t a fixed number — it’s determined by 4 key factors procurement engineers must understand before requesting quotes:
| Factor | Price Impact |
|---|---|
| Al₂O₃ Concentration | PAC 31% (10% Al₂O₃) costs more per kg than PAC 10% (3% Al₂O₃), but cheaper per kg of active ingredient |
| Product Form | Liquid PAC has lower per-kg price, but powder is cheaper for active ingredient transport cost |
| Order Volume | Orders ≥5 tons/month: volume discount. Orders ≥24 tons/delivery: direct tanker pricing |
| Shipping Distance | Loc Thien warehouses near customer’s industrial zone → lower freight. Delivery from Binh Duong to Northern Vietnam: additional transport fee |
2. Reference PAC price list — August 2026 update
Important note: Below is the industrial packaging & logistics matrix used for batch quotations. Actual prices fluctuate with raw material costs (Al(OH)₃, HCl), exchange rates, and import tax policies. Call 0979 891 929 for exact quotes on current batches.
| Product | Unit | Batch Quote | Notes |
|---|---|---|---|
| PAC 31% (liquid) | Kg | [CALL FOR QUOTE — batch-dependent] | 5–30 ton tankers; 200kg drums |
| PAC 17% (liquid) | Kg | [CALL FOR QUOTE — batch-dependent] | 200L drums; 1,000L IBCs |
| PAC 10% (liquid) | Kg | [CALL FOR QUOTE — batch-dependent] | 200L drums; 30L cans |
| PAC Powder 28–30% | Kg | [CALL FOR QUOTE — batch-dependent] | 25kg PP/PE bags |
| Transport Fee | Trip | [Quoted per actual route] | Specialized tankers, trucks |
Figure: On-site chemical dosing, storage tank operation, and batch COA inspection — Source: Loc Thien Chemical.
3. Usage cost comparison: Which PAC is most economical?
Purchase price per kg is just part of the equation. Chief engineers and procurement directors must calculate cost-in-use — total expense to treat 1,000 m³ of water, including: chemical cost + transport + storage + usage losses.
Real-world example:
A 20,000 m³/day water plant in Binh Duong uses PAC 31% at 25 mg/L dose:
- Consumption: 500 kg PAC 31%/day (~15 tons/month)
- Delivery via 15-ton tankers/month → optimized logistics
- Switching to PAC 10%: requires 1,500 kg/day (3x more) → 45 tons/month → higher transport costs, larger storage tanks needed
Conclusion: Higher capacity plants save more with concentrated PAC. Below 1,000 m³/day, PAC 10% or 17% are reasonable choices.
4. Where to buy PAC? Supplier selection criteria
When evaluating PAC suppliers, procurement engineers should consider 5 criteria:
4.1. Clear product origin
Vietnamese market PAC comes from China, India, and domestic production. Each source differs in quality — even with identical “PAC 31%” labels, actual Al₂O₃ content and impurities (Fe, heavy metals) may vary significantly. Request COA per batch.
4.2. Warehousing & logistics
Suppliers with warehouses near your industrial zone → faster delivery, lower freight, fewer supply chain risks. Loc Thien operates 6 warehouses in Ba Ria – Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho and Bac Ninh.
4.3. Specialized transport vehicles
Liquid PAC requires dedicated tankers — not shared with food or other chemicals (cross-contamination risk). Loc Thien operates a fleet of specialized tankers, ensuring product safety and quality throughout transport.
4.4. Technical support
Good suppliers don’t just sell — they help optimize dosing. Loc Thien engineers provide jar testing at your plant to determine optimal PAC dosage for your water source.
4.5. Flexible payment terms
First orders: payment upon delivery. Regular customers: 15–30 day credit (subject to approval). Framework contracts for orders >5 tons/month.
5. PAC purchasing process at Loc Thien
- Call 0979 891 929 — discuss requirements: PAC type, monthly volume, delivery location
- Receive quote — within 15 minutes via Zalo/Email, with current batch COA
- Jar test (if needed) — Loc Thien engineers conduct on-site testing to determine optimal dose
- Sign contract — 100–200kg sample delivery for practical testing
- Scheduled deliveries — fixed weekly/monthly schedule to prevent stockouts
6. Why choose Loc Thien as your PAC supplier?
Compared to buying from small traders or middlemen, direct orders from Loc Thien offer 4 quantifiable benefits:
1. Logistics cost savings: With 6 nationwide warehouses (Ba Ria – Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho and Bac Ninh), Loc Thien delivers from the nearest warehouse to your plant — reducing transport costs by 15–40% versus distant single-warehouse suppliers.
2. Consistent quality between deliveries: Each batch has its own COA/MSDS — you can compare Al₂O₃ content, basicity, and impurities across shipments. No “first batch good, later batches poor” issues common with unstable sources.
3. Uninterrupted supply: With a fleet of dedicated tankers and ≥500 tons PAC inventory across 6 warehouses, Loc Thien guarantees on-time delivery even during peak seasons (rainy season — PAC demand increases 30–50%).
4. Cost optimization consulting: Loc Thien engineers don’t just sell PAC — they analyze your water source and recommend optimal PAC type + dosage. Many plants reduce chemical costs by 15–25% after switching from PAC 10% to 31%, or from alum to PAC.
Call 0979 891 929 — get a quote in 15 minutes.
7. Frequently asked questions when buying PAC
What’s today’s PAC price?
PAC prices fluctuate with raw material costs and exchange rates. Call 0979 891 929 for exact quotes on current batches — pricing within 15 minutes.
Can I buy small quantities (under 1 ton)?
Yes. Loc Thien supplies PAC 10% in 30L cans and 200L drums for small-scale users — swimming pools, mini water treatment stations, low-capacity plants. However, per-kg price is higher than tanker orders.
Do you deliver to Northern and Central Vietnam?
Yes. Loc Thien delivers nationwide. The Bac Ninh and Da Nang warehouses serve Northern and Central regions. For bulk PAC 31%, deliveries may originate from Binh Duong if nearest warehouse is out of stock.
How long can stored PAC last?
Liquid PAC: 6 months at 5–35°C, avoid sunlight. PAC powder: 12 months if kept dry in sealed bags. Coagulation efficiency gradually declines afterward.
Are long-term contracts required?
Not mandatory. Loc Thien accepts spot orders and long-term contracts. Customers with ≥5 tons/month framework contracts receive preferential pricing and fixed delivery schedules.
Does Loc Thien issue VAT invoices?
Yes. Loc Thien Development Investment Co., Ltd (Tax ID 0313650856) provides full VAT invoices for all orders.
LOC THIEN DEVELOPMENT INVESTMENT CO., LTD
Tax ID: 0313650856 — Address: 452/6B Tinh Lo 10 (Provincial Road 10), Binh Tri Dong Ward, Binh Tan District, Ho Chi Minh City
Hotline: 0979 891 929 — Email: [email protected]
Website: hoachatlocthien.com
Technical Support & B2B Procurement Hotline
Loc Thien Chemical specializes in direct manufacturing of FeCl₂ / FeCl₃ and direct industrial supply of basic chemicals (NaOH, HCl, H₂SO₄, PAC, NaOCl, H₂O₂, FeSO₄) with direct B2B pricing and dedicated 5–30-ton tanker delivery across Vietnam.
- Hotline / Zalo: +84 979 891 929
- Official Email: [email protected]
- Direct Manufacturer: Ferrous Chloride (FeCl₂ 30%) & Ferric Chloride (FeCl₃ 38–40%)
- Primary Supplier: NaOH 32%/45%/50%/99%, HCl 32%, H₂SO₄ 98%, PAC 30–31%, NaOCl 10–12%, H₂O₂ 35%/50%
- Compliance & Quality: FeCl₂ ZDHC MRSL v3.1 test report (Smart testing, 5 substance groups, TUV Rheinland Vietnam), ISO 9001:2015, Quatest 3, Full COA & GHS SDS
Industrial Field Operation & Batch Quality Verification
1. Incoming Batch COA Verification & Regulatory Compliance (Law on Chemicals 69/2025/QH15)
When operating industrial water treatment, surface finishing, or textile dyeing lines in Vietnam, engineering teams must verify every chemical delivery against its batch-specific Certificate of Analysis (COA) and 16-section GHS Safety Data Sheet (SDS). Under the Vietnam Law on Chemicals No. 69/2025/QH15, Decrees 24/2026/ND-CP, 25/2026/ND-CP, and 26/2026/ND-CP, and QCVN 40:2025/BTNMT on industrial wastewater discharge:
- Specific Gravity & Assay Verification: Upon arrival of a 5–30-ton tanker or IBC tote shipment, plant QA technicians measure specific gravity at 20 °C using a calibrated hydrometer and cross-check active concentration against the batch COA issued by Loc Thien Chemical and verified via Quatest 3 (ISO/IEC 17025).
- Impurity & Heavy Metal Control: Trace heavy metals (Fe, Pb, As, Hg, Cd, Cr⁶⁺) and insoluble matter are strictly controlled to prevent catalyst poisoning in Fenton reactors, membrane fouling in RO/UF systems, or shade deviations in reactive textile dyeing.
- ZDHC MRSL v3.1 Level 1 Portfolio Boundary: For export-oriented textile and footwear FDI factories, Loc Thien Chemical maintains official ZDHC MRSL v3.1 Conformance Level 1 documentation for exactly 9 core products: four products certified by TUV SUD Product Service GmbH (
NaOH,H2O2,Na2SO4,Na2CO3) and five products verified via Conformance Summary Report (CSR) and Analytical Test Report by TUV Rheinland Vietnam (H2SO4,FeCl2,HCl,Javel/NaOCl,PAC 31%).
| Control Stage | Inspection Parameter | Test Method / Standard | Operational Target |
|---|---|---|---|
| Pre-Unloading Check | Seal integrity, UN/GHS hazard placards, batch COA & SDS | Visual & Document Audit | 100% match with delivery manifest |
| On-Site Sampling | Specific gravity (20 °C), visual clarity, pH / assay | ASTM / TCVN / Hydrometer | Within ±0.5% of COA specification |
| Dosing Skid Calibration | Metering pump stroke & frequency, back-pressure valve, ORP/pH probe | 2-Point Buffer Calibration | Dosing accuracy ±1.5%, stable effluent |
| Storage Safety Audit | HDPE/FRP tank vents, secondary containment dike (110% volume), eyewash | OSHA / Vietnam EHS | Zero vapor leak, immediate emergency readiness |
2. Dosing Optimization, Storage Materials & Preventive Maintenance
- Compatible Wetted Materials: Use cross-linked high-density polyethylene (XLPE / HDPE), polypropylene (PP-H), fiberglass-reinforced plastic (FRP with vinyl ester resin), or PTFE/PVDF-lined piping depending on corrosive and thermal conditions. Avoid unlined carbon steel or incompatible elastomers.
- Automated Dosing Control: Integrate diaphragm metering pumps with real-time pH, ORP (mV), turbidity, or conductivity sensors. Always perform a 5-beaker Jar Test whenever raw water COD, TSS, or alkalinity shifts by more than 15%.
- Secondary Containment & PPE: Storage tanks must sit inside an acid/alkali-resistant bund wall holding at least 110% of the largest tank volume. Operators handling unloading hoses must wear splash-proof chemical goggles, acid/alkali-resistant nitrile or neoprene gloves, face shields, and emergency respirators.
3. Multi-Role B2B Value Matrix (Procurement · QA/EHS Engineer · Plant Director)
- For Procurement Managers: Loc Thien Chemical is the direct manufacturer of FeCl2 30% solution and FeCl3 38–40% wastewater grade (3,000+ tons/month capacity), and a Tier-1 bulk commercial supplier of NaOH, HCl, H2SO4, PAC, NaOCl, H2O2, FeSO4, and Na2SiO3. Pricing is transparently structured around 5 technical cost drivers (active assay, packaging format, delivery distance from our 6 warehouses, order volume, and scheduled contract cadence) with a 15-minute technical quotation SLA.
- For Environmental & Process Engineers: Full technical support for Jar Test optimization, stoichiometry calculation, sludge minimization, and QCVN 40:2025/BTNMT compliance auditing.
- For FDI Plant Directors: Guaranteed supply continuity via 6 regional warehouses (Ba Ria - Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho, Bac Ninh) and a dedicated 5–30-ton tanker fleet (4 hours in inner HCMC, 24–48 hours across Southern & Mekong Industrial Parks, 2–3 days in Northern & Central Vietnam).
4. Related Technical Resources & 15-Minute Quotation Gateway
- Explore our full industrial catalog: Industrial Chemical Catalog | Technical Knowledge Hub | Request a 15-Minute Technical Quote
- Legal Head Office: 452/6B Tinh Lo 10, Binh Tri Dong Ward, Binh Tan District, Ho Chi Minh City, Vietnam (Head Office only — all physical stock is dispatched from our 6 regional industrial park warehouses).
- 24/7 Technical Hotline: 0979 891 929 (Please contact hotline 0979 891 929 for detailed delivery procedures) | Official Email: [email protected]
Extended Engineering Calculation Example & Jar Test Protocol for Where to Buy Industrial PAC? Price Quotes for PAC 31%, PAC 10%, PAC 17%
In a representative industrial wastewater treatment or surface treatment facility operating at a design flow of 1,200 m³/day (Technical Illustrative Example), process engineers evaluate dosing stoichiometry across three operating scenarios: baseline load, peak shift load (+25% COD/TSS), and seasonal rain dilution. Using calibrated 1,000 mL Jar Test beakers (rapid flash mixing at 180 rpm for 90 seconds, slow flocculation at 35 rpm for 15 minutes, and quiescent settling for 30 minutes), the plant establishes an optimal dosing curve that reduces chemical consumption by 12–18% while maintaining settled water turbidity below 3 NTU and effluent parameters well within QCVN 40:2025/BTNMT Column A. Every bulk shipment from Loc Thien Chemical includes batch-traceable COA analysis, GHS/SDS sheets, and on-site technical support across all 6 regional warehouses in Vietnam.
Transparent 5-Factor B2B Cost Structure & Supply Chain Optimization in Vietnam
Under Loc Thien Chemical’s transparent B2B commercial policy, unit chemical pricing is never published as a static retail figure online; instead, every formal quotation is engineered within 15 minutes around five verifiable cost drivers:
- Active Assay & Grade Specification: Concentration levels (such as 32% / 45% / 50% liquid NaOH vs. 99% pearls, or industrial vs. ZDHC-compliant grades) directly determine the active molar equivalent delivered per metric ton.
- Packaging & Bulk Delivery Mode: Bulk delivery via dedicated 5–30-ton corrosion-resistant tankers eliminates drum handling and minimizes per-ton logistics cost; 1,000 L IBC totes, 200 L drums, and 25 kg woven bags are also stocked.
- Dispatch Distance from Our 6 Regional Warehouses: Orders are routed from the nearest hub (Ba Ria - Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho, or Bac Ninh) to cut freight lead time and carbon footprint.
- Order Volume & Annual Blanket Contracts: Scheduled monthly call-off contracts lock in priority safety stock and volume-tiered commercial terms, insulating factories from raw material spot volatility.
- Batch Documentation & FDI Compliance Package: Every delivery includes a batch-specific COA, 16-section GHS SDS, and—for our 9 certified core textile/footwear chemicals—official ZDHC MRSL v3.1 Conformance Level 1 documentation.