Liquid Caustic Soda 32% (Sodium Hydroxide Solution) – Industrial Grade Bulk Delivery by 5–30 Ton Tankers

Liquid Caustic Soda 32% (Sodium Hydroxide Solution) – Industrial Grade Bulk Delivery by 5–30 Ton Tankers

Loc Thien Chemical is an Industrial Chemical Bulk Supplier of Liquid Caustic Soda 32% (NaOH, CAS 1310-73-2) in Vietnam. Dedicated 5–30-ton chemical tankers, ideal for industrial WWTP pH neutralization, textile scouring, and paper processing. 15-minute quotation. Hotline: +84 979 891 929.

Call 0979 891 929 Request a quote ✉️ [email protected] 💬 Zalo: +84 979 891 929

✓ FDI Bulk Supply Standard: EPE 0% VAT customs declaration · Vietnam e-VAT (Decree 70/2025/NĐ-CP) · On-site weighbridge check (tanker/full-load) · Batch COA & 16-section GHS SDS
Technical Entity Profile: Formula NaOH · CAS 1310-73-2 · Molar Mass (M): 40.00 g/mol · Specific Gravity (20°C): 1.35 g/cm³ (32%, 20°C) · UN 1824 · Compliance: ZDHC MRSL v3.1 Level 1 (TÜV SÜD Cert #ZDHC1 127736 0001 Rev. 00)
Table of contents

Liquid Caustic Soda 32% (Sodium Hydroxide Aqueous Solution, NaOH 32%) (CAS 1310-73-2, MW 40.00 g/mol) is a heavy-duty industrial inorganic alkali solution supplied by Loc Thien Chemical as a Industrial Chemical Bulk Supplier to multinational FDI manufacturing facilities and industrial wastewater treatment plants across Vietnam. Featuring a density of 1.350 g/cm³ at 20°C and a low freezing point of -4°C, this solution remains completely liquid without pipeline crystallization under tropical environmental conditions. Loc Thien operates a specialized logistics fleet of 5–30-ton corrosion-resistant chemical road tankers providing continuous bulk deliveries to industrial zones across Binh Duong, Dong Nai, Long An, Bac Ninh, and Hai Phong with a guaranteed 15-minute RFQ response.

Loc Thien Chemical maintains direct direct bulk supply channels with leading domestic and regional chlor-alkali complexes, securing thousands of tons of high-purity liquid caustic soda monthly. Every shipment is accompanied by lot-specific Certificates of Analysis (COA), Technical Data Sheets (TDS), and comprehensive bilingual SDS/MSDS complying with Vietnamese environmental standard QCVN 40:2025/BTNMT and international industrial standards.

Liquid Caustic Soda 32% Technical Specifications

Loc Thien's industrial liquid caustic soda 32% complies with Vietnamese technical standard TCCS 03:2020/LT and international standards ASTM E291 and KS M 1106.

ParameterTechnical SpecificationTest Method
Chemical NameLiquid Caustic Soda 32% / Sodium Hydroxide SolutionIUPAC / CAS Nomenclature
Chemical Formula & MWNaOH (40.00 g/mol)Structural Chemistry
CAS Registry Number1310-73-2CAS Registry
UN Number & Hazard ClassUN 1824, Class 8 Corrosive Liquid, Packing Group IIDOT / IMDG Rules
NaOH Concentration32.0% ± 1.0%Acid-Base Titration
AppearanceClear, colorless, viscous liquid, free from suspended solidsVisual Inspection
Density (at 20°C)1.340 – 1.360 g/cm³Hydrometer / ASTM D1298
Specific Gravity / Baumé37.0° – 38.0° BéBaumé Hydrometry
Freezing Point-4°C (Fully liquid at ambient temperature)Phase Analysis
Sodium Carbonate (Na₂CO₃)≤ 0.20%Volumetric Analysis
Sodium Chloride (NaCl)≤ 0.01%Potentiometric Titration
Iron (Fe) Content≤ 5 ppm (Heavy metal restricted)ICP-OES / AAS
Packaging & Delivery Units30L Cans, 250kg Drums, 1,000L IBC Tanks, 5–30-ton Bulk TankersAlkali-Resistant Dedicated Units
Liquid Caustic Soda 32% (Sodium Hydroxide Solution) – Industrial Grade Bulk Delivery by 5–30 Ton Tankers
Actual industrial field deployment, automated dosing system, and 5–30-ton bulk tanker logistics at Loc Thien Chemical.

Industrial Applications and Chemical Reaction Mechanisms

1. Automated Industrial Wastewater Neutralization and Heavy Metal Precipitation

Industrial effluent from electronics, electroplating, chemical synthesis, and steel pickling lines contains strong mineral acids (HCl, H₂SO₄, HNO₃) that must be neutralized to pH 6.0–9.0 prior to municipal or environmental discharge. Sodium hydroxide dissociates 100% in aqueous solution, releasing hydroxide ions (OH⁻) that neutralize hydronium ions rapidly:

H⁺ + OH⁻ → H₂O

Simultaneously, dissolved polyvalent toxic heavy metal cations are converted into insoluble metal hydroxide flocs for rapid clarification:

M²⁺ + 2OH⁻ → M(OH)₂ ↓   (M = Fe, Cu, Ni, Zn, Pb)

Compared to hydrated lime (Ca(OH)₂), caustic soda generates significantly less chemical sludge, leaves no scale deposits in dosing nozzles, and enables precise automated dosing control via SCADA/PLC systems.

2. Textile Mercerization and Fabric Scouring

In the textile and garment industry, NaOH 32% is essential for scouring natural cotton to dissolve waxes, pectins, and proteinaceous impurities. In mercerization, high alkaline treatment swells the cotton fibers, permanently enhancing tensile strength, dimensional stability, and dye affinity.

3. Clean-In-Place (CIP) in Food and Beverage Processing

Concentrated caustic solutions effectively saponify fats, hydrolyze protein deposits, and clean organic residues within pipeline systems, heat exchangers, and fermentation vessels in breweries, dairy plants, and beverage manufacturing.

EHS Safety Management and Storage Standards

  • Storage Tank Metallurgy: Caustic soda 32% can be stored at ambient temperatures in carbon steel tanks; however, for maximum purity and zero iron contamination, 304/316L Stainless Steel, Cross-linked High-Density Polyethylene (XLPE/HDPE), or Fiber-Reinforced Plastic (FRP) are strongly recommended.
  • Incompatible Materials: Never expose caustic soda to aluminum, zinc, tin, or brass, as contact produces flammable and explosive hydrogen gas (H₂).
  • Personal Protective Equipment (PPE): Caustic soda causes severe chemical burns and irreversible ocular damage. Handlers must wear full chemical splash goggles, neoprene/EPDM gloves, chemical aprons, and full-face shields during transfer operations.

⚡ Request an Official B2B Bulk Quotation (15-Minute Response)

Contact Loc Thien Chemical for bulk tanker deliveries of Liquid Caustic Soda 32% with guaranteed competitive pricing and immediate technical documentation.

ZDHC MRSL Version 3.1 Conformance Level 1 — Sodium Hydroxide (NaOH — Caustic Soda)

  • Official Documentation: Certificate of Conformance — ZDHC MRSL Version 3.1 Level 1 (PPP 25089F:2023)
  • Issuing Body: TÜV SÜD Product Service GmbH (Munich, Germany) / TÜV SÜD Vietnam
  • Certificate / Report Holder: LOC THIEN INVESTMENT DEVELOPMENT COMPANY LIMITED
  • Certificate / CSR No.: ZDHC1 127736 0001 Rev. 00 | Analytical Test Report No.: 2486017672-Q24VPS-CHM2869
  • Analytical Results: 4/4 substance groups PASS: Alkylphenol (AP) & Alkylphenol Ethoxylates (APEOs); Borate, zinc salt; Perboric acid, sodium salt; Total Heavy Metals

Loc Thien 9-Product ZDHC MRSL v3.1 Level 1 Portfolio: Includes 4 TÜV SÜD Level 1 Certificates (ZDHC1 127736 0001–0004: NaOH, H₂O₂, Na₂SO₄, Na₂CO₃) and 5 TÜV Rheinland Level 1 CSR & Analytical Test Reports (248162921-01–05: H₂SO₄, FeCl₂, HCl, Javel/NaOCl, PAC 31%). FDI textile and footwear manufacturers requiring official PDF dossiers with batch COA/SDS for ZDHC Gateway audits may request documentation here (15-minute response SLA).

Related products

In-Depth Technical & Application Guides

WeChat B2B

Connect via WeChat B2B

Loc Thien Chemical — Direct Manufacturer & Industrial Chemical Supplier

Loc Thien Chemical Official WeChat B2B QR Code 0979891929

Scan QR code with WeChat on your phone

WeChat ID 0979891929

Tap the copy button above, then open WeChat and paste ID into Search to connect.

Direct Technical & Bulk Quotation Hotline: 📞 0979 891 929