Industrial Synthesis of FeCl2 (Fe + 2HCl): Reaction Process & Purity Standards

FeCl2 production
Table of contents
FeCl2 (Ferrous Chloride, CAS 7758-94-3) is industrially produced through direct reaction between metallic iron and hydrochloric acid — Fe + 2HCl → FeCl₂ + H₂↑ — in a closed system that controls impurities and safely collects hydrogen gas. Loc Thien Chemicals has been directly producing FeCl2 since 2016, providing COA/MSDS per batch, with delivery via a fleet of tanker trucks (5–30 tons) or 1000L IBCs from 6 warehouses across 3 regions nationwide. Call 0979 891 929 for technical standards and quotations.

Summary:

  • Reaction Fe + HCl → FeCl₂ + H₂↑ — closed chemical synthesis, not recovery or recycling
  • Critical Fe³⁺ ≤0.5% standard — determines FeCl2’s effectiveness in reducing Cr⁶⁺/CN⁻
  • 6 closed-loop stages — from raw material preparation to packaging, with batch analysis
  • a fleet of tanker trucks (5–30 tons) + 6 warehouses in 3 regions — 4-hour delivery in Ho Chi Minh City, 24–48 hours to Southern industrial zones
  • COA/MSDS per batch — complete documentation compliant with ISO 14001 audits

How is FeCl2 Produced?

Industrial FeCl2 is synthesized directly from the reaction between metallic iron and hydrochloric acid: Fe + 2HCl → FeCl₂ + H₂↑. This is a closed-loop chemical synthesis — raw iron completely reacts with HCl to form pure FeCl2 solution, with hydrogen gas safely treated. The process yields high-purity products with tightly controlled impurities, with each batch meeting uniform CoA standards.

FeCl2 Production Process at Loc Thien

Loc Thien’s FeCl2 production involves 6 closed-loop stages: (1) Raw material preparation: metallic iron and industrial HCl undergo quality checks. (2) Reaction: iron reacts with HCl in acid-resistant reactors, generating heat and releasing H₂. (3) Filtration: post-reaction solution is filtered to remove insoluble solids. (4) Concentration adjustment: solution is diluted or concentrated to achieve standard FeCl2 content. (5) Testing: samples from each batch are analyzed for FeCl2 content, Fe³⁺, density, and pH before dispatch. (6) Packaging: filled into 1000L IBCs or directly pumped into 5-30 ton tankers.

Quality Standards of Finished FeCl2

Loc Thien’s finished FeCl2 meets technical standards for wastewater coagulation and electroplating, verified through batch CoAs.

ParameterUnitValue
FeCl2 content%≥28-30
Iron (III) impurity Fe³⁺%≤0.5
Density (20°C)g/ml1.30-1.35
pH (stock solution)—<1.0
Color—Light green
Supply form—30% solution, FeCl2·4H2O crystals

Controlling Fe³⁺ ≤0.5% is critical — high Fe³⁺ reduces FeCl2’s reducing power, directly impacting Cr⁶⁺ and CN⁻ removal efficiency in electroplating wastewater. Customers receive CoAs detailing all parameters for each delivered batch.

Differences Between Industrial Production and Lab Synthesis

Lab synthesis of FeCl2 typically handles hundreds of grams using glassware and manual controls — sufficient for research but inconsistent between batches. Industrial production differs in three aspects: large scale (tens of tons per batch), systematic quality control (stage-wise sampling, batch CoAs), and process safety (H₂ treatment systems, acid-resistant reactors, standardized SOPs). For plants using FeCl2 as regular coagulants, industrial products ensure dosing consistency — essential for stable wastewater treatment operations.

Why Choose Loc Thien's FeCl2?

Loc Thien manufactures FeCl2 directly — bypassing commercial intermediaries. This delivers three concrete benefits: (1) Factory-direct pricing without supply chain markups; (2) Complete transparent CO/CQ/CoA with batch traceability — compliant with ISO 14001 audits; (3) Proactive inventory from 6 regional warehouses ensuring on-time deliveries. Loc Thien’s chemical engineers provide dosage consultation, storage material advice, and jar testing for industrial clients.

FeCl2 Quotation — Tankers or 1000L IBCs

Loc Thien delivers FeCl2 via two methods: dedicated 5–30 ton tankers for direct pumping (optimal for ≥5 ton orders) or 1000L IBCs for smaller quantities. Download FeCl2 TDS (PDF) or call 0979 891 929 for concentration/volume-based quotes — response within 15 minutes, nationwide delivery from 6 warehouses, with batch-specific COA/MSDS.

Frequently Asked Questions

How does lab synthesis differ from industrial FeCl2 production?

Lab synthesis operates at gram-scale with manual controls and batch inconsistency. Industrial production handles ton-scale quantities with stage-wise quality control, batch CoAs, and closed-loop safety protocols — yielding uniform products compliant with industrial wastewater treatment standards.

Does FeCl2 production generate hazardous gases?

Yes. The Fe + HCl reaction produces hydrogen (H₂) — a flammable explosive gas. Industrial production captures and treats H₂ via ventilation systems maintaining safe concentrations. Never synthesize FeCl2 outside controlled processes due to explosion risks and HCl vapor exposure.

Why is Fe³⁺ content critical in finished FeCl2?

Fe³⁺ ≤0.5% is the key parameter. High Fe³⁺ diminishes Fe²⁺‘s reducing capacity, lowering Cr⁶⁺ and CN⁻ removal efficiency in electroplating/textile wastewater. Loc Thien strictly controls this parameter with explicit CoA documentation per batch.

What documents accompany bulk FeCl2 purchases?

Industrial clients receive full VAT invoices, CO (certificate of origin), CQ (quality certificate), CoA (analysis certificate), MSDS, and delivery records. This documentation meets ISO 14001 environmental management audits and plant chemical compliance requirements.

What are FeCl2 delivery lead times?

Available stock delivers within 4 hours in Ho Chi Minh City, 24–48 hours to Southern industrial zones. Central/Northern regions receive shipments within 2–3 days from Da Nang or Bac Ninh warehouses. Large contract orders follow agreed periodic schedules.

Request a Quotation

Your business seeking direct FeCl2 production sources — verify Loc Thien’s capabilities:

  • Call 0979 891 929 — receive quotes within 15 minutes with current batch CoA
  • Factory audit — verify closed-loop FeCl2 production before contract signing
  • Trial order — experience the workflow from quotation → batch-specific COA/MSDS → delivery

Verifiable Operational Capacity:

  • a fleet of dedicated 5–30 ton tankers — direct ownership, no subcontracting. License plates provided during audits
  • 6 warehouses across 3 regions: Ba Ria – Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho and Bac Ninh — specific addresses per site
  • COA/MSDS per delivery batch — 100% documentation compliance with ISO 9001/14001
  • Direct Vietnam production since 2016 — transparent CO/CQ/CoA with full batch traceability

LOC THIEN INVESTMENT DEVELOPMENT COMPANY LIMITED

Tax ID: 0313650856 Hotline: 0979 891 929 Website: hoachatlocthien.com

See Also:

Technical Support & B2B Procurement Hotline

Loc Thien Chemical specializes in direct manufacturing of FeCl₂ / FeCl₃ and direct industrial supply of basic chemicals (NaOH, HCl, H₂SO₄, PAC, NaOCl, H₂O₂, FeSO₄) with direct B2B pricing and dedicated 5–30-ton tanker delivery across Vietnam.

  • Hotline / Zalo: +84 979 891 929
  • Official Email: [email protected]
  • Direct Manufacturer: Ferrous Chloride (FeCl₂ 30%) & Ferric Chloride (FeCl₃ 38–40%)
  • Primary Supplier: NaOH 32%/45%/50%/99%, HCl 32%, H₂SO₄ 98%, PAC 30–31%, NaOCl 10–12%, H₂O₂ 35%/50%
  • Compliance & Quality: FeCl₂ ZDHC MRSL v3.1 test report (Smart testing, 5 substance groups, TUV Rheinland Vietnam), ISO 9001:2015, Quatest 3, Full COA & GHS SDS

Industrial Production of FeCl2: Process, Standards & Quotation - Industrial Operation & Quality Control - Loc Thien Chemical Figure: On-site chemical dosing, storage tank operation, and batch COA inspection — Source: Loc Thien Chemical.

Industrial Field Operation & Batch Quality Verification

Industrial Production of FeCl2: Process, Standards & Quotation — Industrial application and bulk logistics at Loc Thien Chemical
Actual industrial field deployment, automated dosing skid, and bulk warehousing operated by Loc Thien Chemical across Vietnam.

1. Incoming Batch COA Verification & Regulatory Compliance (Law on Chemicals 69/2025/QH15)

When operating industrial water treatment, surface finishing, or textile dyeing lines in Vietnam, engineering teams must verify every chemical delivery against its batch-specific Certificate of Analysis (COA) and 16-section GHS Safety Data Sheet (SDS). Under the Vietnam Law on Chemicals No. 69/2025/QH15, Decrees 24/2026/ND-CP, 25/2026/ND-CP, and 26/2026/ND-CP, and QCVN 40:2025/BTNMT on industrial wastewater discharge:

  • Specific Gravity & Assay Verification: Upon arrival of a 5–30-ton tanker or IBC tote shipment, plant QA technicians measure specific gravity at 20 °C using a calibrated hydrometer and cross-check active concentration against the batch COA issued by Loc Thien Chemical and verified via Quatest 3 (ISO/IEC 17025).
  • Impurity & Heavy Metal Control: Trace heavy metals (Fe, Pb, As, Hg, Cd, Cr⁶⁺) and insoluble matter are strictly controlled to prevent catalyst poisoning in Fenton reactors, membrane fouling in RO/UF systems, or shade deviations in reactive textile dyeing.
  • ZDHC MRSL v3.1 Level 1 Portfolio Boundary: For export-oriented textile and footwear FDI factories, Loc Thien Chemical maintains official ZDHC MRSL v3.1 Conformance Level 1 documentation for exactly 9 core products: four products certified by TUV SUD Product Service GmbH (NaOH, H2O2, Na2SO4, Na2CO3) and five products verified via Conformance Summary Report (CSR) and Analytical Test Report by TUV Rheinland Vietnam (H2SO4, FeCl2, HCl, Javel/NaOCl, PAC 31%).
Control StageInspection ParameterTest Method / StandardOperational Target
Pre-Unloading CheckSeal integrity, UN/GHS hazard placards, batch COA & SDSVisual & Document Audit100% match with delivery manifest
On-Site SamplingSpecific gravity (20 °C), visual clarity, pH / assayASTM / TCVN / HydrometerWithin ±0.5% of COA specification
Dosing Skid CalibrationMetering pump stroke & frequency, back-pressure valve, ORP/pH probe2-Point Buffer CalibrationDosing accuracy ±1.5%, stable effluent
Storage Safety AuditHDPE/FRP tank vents, secondary containment dike (110% volume), eyewashOSHA / Vietnam EHSZero vapor leak, immediate emergency readiness

2. Dosing Optimization, Storage Materials & Preventive Maintenance

  1. Compatible Wetted Materials: Use cross-linked high-density polyethylene (XLPE / HDPE), polypropylene (PP-H), fiberglass-reinforced plastic (FRP with vinyl ester resin), or PTFE/PVDF-lined piping depending on corrosive and thermal conditions. Avoid unlined carbon steel or incompatible elastomers.
  2. Automated Dosing Control: Integrate diaphragm metering pumps with real-time pH, ORP (mV), turbidity, or conductivity sensors. Always perform a 5-beaker Jar Test whenever raw water COD, TSS, or alkalinity shifts by more than 15%.
  3. Secondary Containment & PPE: Storage tanks must sit inside an acid/alkali-resistant bund wall holding at least 110% of the largest tank volume. Operators handling unloading hoses must wear splash-proof chemical goggles, acid/alkali-resistant nitrile or neoprene gloves, face shields, and emergency respirators.

3. Multi-Role B2B Value Matrix (Procurement · QA/EHS Engineer · Plant Director)

  • For Procurement Managers: Loc Thien Chemical is the direct manufacturer of FeCl2 30% solution and FeCl3 38–40% wastewater grade (3,000+ tons/month capacity), and a Tier-1 bulk commercial supplier of NaOH, HCl, H2SO4, PAC, NaOCl, H2O2, FeSO4, and Na2SiO3. Pricing is transparently structured around 5 technical cost drivers (active assay, packaging format, delivery distance from our 6 warehouses, order volume, and scheduled contract cadence) with a 15-minute technical quotation SLA.
  • For Environmental & Process Engineers: Full technical support for Jar Test optimization, stoichiometry calculation, sludge minimization, and QCVN 40:2025/BTNMT compliance auditing.
  • For FDI Plant Directors: Guaranteed supply continuity via 6 regional warehouses (Ba Ria - Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho, Bac Ninh) and a dedicated 5–30-ton tanker fleet (4 hours in inner HCMC, 24–48 hours across Southern & Mekong Industrial Parks, 2–3 days in Northern & Central Vietnam).

Extended Engineering Calculation Example & Jar Test Protocol for Industrial Production of FeCl2: Process, Standards & Quotation

In a representative industrial wastewater treatment or surface treatment facility operating at a design flow of 1,200 m³/day (Technical Illustrative Example), process engineers evaluate dosing stoichiometry across three operating scenarios: baseline load, peak shift load (+25% COD/TSS), and seasonal rain dilution. Using calibrated 1,000 mL Jar Test beakers (rapid flash mixing at 180 rpm for 90 seconds, slow flocculation at 35 rpm for 15 minutes, and quiescent settling for 30 minutes), the plant establishes an optimal dosing curve that reduces chemical consumption by 12–18% while maintaining settled water turbidity below 3 NTU and effluent parameters well within QCVN 40:2025/BTNMT Column A. Every bulk shipment from Loc Thien Chemical includes batch-traceable COA analysis, GHS/SDS sheets, and on-site technical support across all 6 regional warehouses in Vietnam.

Transparent 5-Factor B2B Cost Structure & Supply Chain Optimization in Vietnam

Under Loc Thien Chemical’s transparent B2B commercial policy, unit chemical pricing is never published as a static retail figure online; instead, every formal quotation is engineered within 15 minutes around five verifiable cost drivers:

  1. Active Assay & Grade Specification: Concentration levels (such as 32% / 45% / 50% liquid NaOH vs. 99% pearls, or industrial vs. ZDHC-compliant grades) directly determine the active molar equivalent delivered per metric ton.
  2. Packaging & Bulk Delivery Mode: Bulk delivery via dedicated 5–30-ton corrosion-resistant tankers eliminates drum handling and minimizes per-ton logistics cost; 1,000 L IBC totes, 200 L drums, and 25 kg woven bags are also stocked.
  3. Dispatch Distance from Our 6 Regional Warehouses: Orders are routed from the nearest hub (Ba Ria - Vung Tau, Dong Nai, Binh Duong, Da Nang, Can Tho, or Bac Ninh) to cut freight lead time and carbon footprint.
  4. Order Volume & Annual Blanket Contracts: Scheduled monthly call-off contracts lock in priority safety stock and volume-tiered commercial terms, insulating factories from raw material spot volatility.
  5. Batch Documentation & FDI Compliance Package: Every delivery includes a batch-specific COA, 16-section GHS SDS, and—for our 9 certified core textile/footwear chemicals—official ZDHC MRSL v3.1 Conformance Level 1 documentation.
WeChat B2B

Connect via WeChat B2B

Loc Thien Chemical — Direct Manufacturer & Industrial Chemical Supplier

Loc Thien Chemical Official WeChat B2B QR Code 0979891929

Scan QR code with WeChat on your phone

WeChat ID 0979891929

Tap the copy button above, then open WeChat and paste ID into Search to connect.

Direct Technical & Bulk Quotation Hotline: 📞 0979 891 929