H2O2 35% Food Grade INTEROX FCC 35 — Solvay Thailand (30kg Can)
Bulk Food-Grade Hydrogen Peroxide INTEROX FCC 35% (Solvay Thailand, CAS 7722-84-1, 30kg cans) for aseptic Tetra Pak sterilization & dairy CIP. 15-min quote: +84 979 891 929.
Table of contents
INTEROX® FCC 35 (Hydrogen Peroxide 35% Food Chemical Codex Grade) — CAS 7722-84-1, UN 2014 — is a high-purity aseptic and food-contact grade hydrogen peroxide manufactured by Solvay Peroxythai Limited (Map Ta Phut Industrial Estate, Rayong, Thailand) and officially imported and distributed in Vietnam by Loc Thien Chemical. Supplied exclusively in factory-sealed 30 kg food-grade HDPE drums, INTEROX FCC 35 meets all 9 purity criteria of the US Food Chemical Codex (FCC) and FDA 21 CFR 184.1366 (GRAS).
According to Solvay batch COA P69260203, the solution delivers 35.5% w/w H₂O₂ (spec ≥ 35.0%), ultra-low acidity (0.01% as H₂SO₄), thermal stability of 0.21 mL O₂/min, and non-detectable toxic heavy metals (Arsenic As < 0.1 ppm, Iron Fe < 0.0 ppm, Lead Pb < 0.0 ppm). It decomposes cleanly into potable water and oxygen without leaving chlorinated residues (THMs/chlorate).
Stocked across Loc Thien's 6 industrial park warehouses nationwide with full batch COA, GHS 2026 SDS, and Halal/Kosher documentation. Call 0979 891 929 for a technical quote within 15 minutes.
- Manufacturer & Brand: INTEROX® FCC 35 — Solvay Peroxythai Limited (Thailand)
- Food Safety Compliance: Complies with US Food Chemical Codex (FCC), FDA 21 CFR 184.1366 (GRAS), JECFA, Halal & Kosher
- Verified Batch COA (Lot
P69260203): Assay 35.5% w/w; As < 0.1 mg/kg; Fe < 0.0 mg/kg; Pb < 0.0 mg/kg; PO₄ < 3.6 mg/kg; Sn < 3.6 mg/kg - Dedicated Packaging: Factory-sealed 30 kg HDPE drum with vented cap (640 drums/container = 19,200 kg; never decanted into bulk bulk vessels to prevent cross-contamination)
📌 Distinguish Solvay Thailand's 2 Grades: This page is for INTEROX® FCC 35 (35% Food & Aseptic Packaging Grade — 30kg HDPE Drum). If your plant requires 50% Industrial Technical Grade for ZDHC Level 1 textile bleaching or Fenton wastewater oxidation, please select Thailand H₂O₂ 50% INTEROX ST 50 (35kg Can) or Multi-Origin Industrial H₂O₂ 50%.
Technical Data Sheet (TDS) & Batch COA — INTEROX® FCC 35
| Parameter | FCC Specification | COA Batch P69260203 | Test Method / Note |
|---|---|---|---|
| Assay (H₂O₂ Content) | 35.0% – 36.0% w/w | 35.5% w/w | USP / FCC Titrimetric |
| Specific Gravity (20°C) | 1.131 – 1.135 g/cm³ | 1.132 g/cm³ | Boiling point ~108 °C; Freezing point −33 °C |
| Acidity (as H₂SO₄) | ≤ 0.03% w/w | 0.01% w/w | Protects stainless steel 316L aseptic nozzles |
| Stability (100°C, 24h) | ≤ 3.00 mL O₂/min | 0.21 mL O₂/min | 14× better than FCC maximum limit |
| Arsenic (As) | ≤ 0.5 mg/kg (ppm) | < 0.1 mg/kg | ICP-MS trace metal verification |
| Lead (Pb) & Iron (Fe) | Pb ≤ 0.5 ppm / Fe ≤ 0.5 ppm | Pb < 0.0 / Fe < 0.0 ppm | Below food-contact detection limit |
| Phosphate (PO₄) & Tin (Sn) | PO₄ ≤ 50 ppm / Sn ≤ 10 ppm | < 3.6 mg/kg each | Food-safe stabilizer system (low evaporation residue) |
| Standard Packaging | 30 kg HDPE Drum | Factory-sealed Solvay drum | Transported via 5–30 ton ADR-compliant enclosed trucks |
Core Aseptic & Food Processing Applications
1. Aseptic Packaging Sterilization (Tetra Pak, Combibloc & PET Lines): Used in immersion bath (dip-bath) or vaporized hydrogen peroxide (VHP) spray systems at 70–85°C to achieve a ≥ 6-log reduction of heat-resistant bacterial spores (Bacillus atrophaeus / Geobacillus stearothermophilus) on laminated paperboard and PET preforms for UHT milk, plant-based beverages, and juices, complying with FDA 21 CFR 178.1005 (< 0.5 ppm residual in headspace check).
2. Dairy, Brewery & Beverage CIP Disinfection: Applied at 0.3%–1.5% dilution in automated Clean-In-Place (CIP) loops for fermentation tanks, heat exchangers, and filling valves, eliminating chlorine odor and organic halide byproducts.
3. Illustrative Technical Example in Agricultural & Seafood Washing: In automated produce and seafood processing lines, diluting INTEROX FCC 35 to 0.5%–1.0% controls surface microbial load under FDA 21 CFR 184.1366 guidelines before decomposing into water and oxygen.
Frequently Asked Questions (FAQ) — INTEROX® FCC 35
Why can't 50% industrial hydrogen peroxide be diluted to replace INTEROX FCC 35?
Industrial 50% H₂O₂ contains technical-grade organic/phosphonate stabilizers and higher heavy metal tolerances that leave non-volatile residues on heated aseptic rollers and violate FDA/FCC food-contact laws. Only certified Food Chemical Codex grades like INTEROX FCC 35 (As < 0.1 ppm, Pb < 0.0 ppm) are permitted in food and aseptic packaging plants.
In what packaging is INTEROX FCC 35 delivered?
To guarantee zero cross-contamination and original Solvay seal integrity, INTEROX FCC 35 is supplied strictly in 30 kg food-grade HDPE drums (palletized or full container loads of 640 drums = 19.2 MT), delivered via Loc Thien's 5–30 ton truck fleet.
What is the delivery SLA from Loc Thien's 6 warehouses?
Estimated delivery lead time: inner Ho Chi Minh City within 4 hours; Southern and Mekong Delta industrial parks within 24–48 hours; Northern and Central Vietnam within 2–3 days. Contact hotline 0979 891 929 for detailed delivery scheduling and a 15-minute quote.
Related products
In-Depth Technical & Application Guides
COA & MSDS H2O2 35% Food Grade FCC — Solvay Thailand | Technical Specifications 
H2O2 35% Food Grade in Dairy, Beer & Beverages — Applications & Standards 
H₂O₂ Fenton — Optimizing Fe²⁺:H₂O₂ Ratio & 500 m³/Day Calculation Example 
H2O2 Food Grade FCC 35% vs Industrial 50% — Technical Differences & Applications 
H₂O₂ vs NaOCl — Comparison of 2 Industrial Bleaching Agents for Textile & Paper